UTP Category 5e Patch Cords

 

Level 5, 5e, & 6 four twisted pair #24 awg MM8 to MM8 built in standard or custom lengths.

Available in either the overmolded or non overmolded version.

Choose from a variety of colors.

Strain Relief is molded of PVC to match color of jacket. Also available with non-migrating PVC.

 

Conforms to TIA/EIA 568-A Standards.

Cable (Quabbin Wire & Cable)

Construction

Primaries:

Conductor; 24 awg (7/32) stranded tinned or

bare copper

Insulation; High Density Thermoplastic polyethylene, .007 nom. Wall thickness

 

Pair Assembly:

Color coded singles twisted into pairs

 

Cable Assembly:

(4) Twisted pairs twisted together to form a cable

core

 

Jacket:

Polyvinylchloride, various colors, nominal O.D:

.213", Wall thickness .020” nominal

 

Color Code: 1. Wht/Blu, Blu  3. Wht/Grn, Grn

                     2. Wht/Org, Org 4. Wht/Brn, Brn

 

Listing:

UL Type CM

CSA Type CMG

ETL Verified to Cat 5e

 

Applications:

Jumper and Patch Cable for Category 5 & 5e applications. Supports ATM applications to

155 MHZ or other extended frequency applications.

 

Electrical Characteristics

 

Capacitance, Mutual:   13.5 PF/FT at 1 MHZ

 

Dielectric Withstanding:  1500V RMS

 

Voltage Rating Max:   300V

 

D.C. Resistance, Max:   26.0 Ohms

 

Impedance:   100+/- 15 Ohms 1-350 MHZ

 

Impedance Smoothed:

100+/- 10 Ohms typical 5-100 MHZ

 

SRL:

23 DB 1-20 MHZ

23-10 LOG (F/20) 20-100 MHZ

 

Return Loss:

1-10 MHZ        20 + 5 LOG (F) DB min.

10-20 MHZ      25 DB min.

20-100 MHZ    25-8.6 LOG (F/20) DB min.

 

PS NEXT:       1-100 MHZ  64-15 LOG (F/.772) min.

 

NEXT:            1-100 MHZ  67-15 LOG (F/.772) min.

 

PS ELFEXT:  1-100 MHZ  63-20 LOG (F/.772) min.

 

ELFEXT:         1-100 MHZ  66-20 LOG (F/.772) min.

 

Attenuation: 

1-100 MHZ  1.2[1.967 SQRT (F) + .023

(F) + .05/SQRT (F)] max.

 

Delay:            1-100 MHZ 534 + 36/SQRT (F)

 

Delay Skew:  1-100 MHZ < 25 ns

 

LCL:               1-100 MHZ –38 dB min.

 

NOTE: The above Electrical Specifications are subject to change as product improvements evolve.

 

NOTE:  All Testing conducted prior to end product is conducted off the reel.

 

Modular Plug (Sentinel or Amp)

Mechanical

Cable-to-Plug Tensile Srength:

17 lbs. (76 N) minimum

 

Electrical

 

UL Applications:

150 volts AC max., at 1.5 amps

 

Dielectric Withstanding Voltage:

1000 volts AC

 

Insulation Resistance:

500 megohms

 

Material and Finish

 

Housing:

Polycarbonate, UL 94V-O Rated

 

Contacts: (8)

.014 (0.36) thk. phosphor bronze; plated

.000050 (0.00127) gold in contact area and

gold flash on remainder of contact, over

.000100 (0.00254) nickel underplate.

 

UL, CSA Certified

 

PVC Physical Properties

 

Specific Gravity............................….  1.43

 

Durometer, Shore A......................…..  85

 

Tensile Strength, PSI...................….. 2000

 

Ultimate Elongation, %..................….. 300

 

Brittleness Temperature

degrees Celsius..........................…….. -22

 

Tear Strength, PPI...............................320

 

Flammability UL 94............................  HB

 

Recommended Stock Temp.

degrees F......................................…. .365

 

 

 

 

All Assemblies Tested to

EIA/TIA 568-A